The post How To Get Rid Of Mold In Carpet appeared first on Guru Restoration.
]]>Mold is a fungus that destroys different surfaces, in particular, corrodes the carpet fibers. It emits a stale odor, and it is usually bad for your health – especially if you have allergies, asthma, or immune system disorders.
Of course, high humidity can provoke fungus and mold. That is why it is easier to prevent it than to deal with the consequences later.
Most often, the carpet gets moldy in the following places:
The chemical industry produces a lot of liquids and powders for fungus control. Fungicide sprays are the most popular. They are easy to apply and can be used on any surface. In addition, they are affected by black, gray, green mold, and most types of rotten bacteria.
However, the store with fungicides is not always around, and not everyone wants to use chemicals in the house, especially when it comes to the carpet on which children play.
Vinegar | Apply it to the carpet with a sponge, without dilution. Leave it for an hour, then rinse with clean water. Vinegar does not kill all kinds of germs and is not suitable for all carpet fibers. Before you clean the whole carpet from mildew, try a small area, how this product will work. |
Soda | Excellent mold removal and odor removal. To destroy germs, soda should be diluted in warm water. Apply the solution to the carpet and leave it to dry. Vacuum away the dry crystals. |
Tea tree essential oil | Dilute 1 tbsp in a glass of water and pour the solution into the sprayer. Spray the contaminated areas and leave to dry. This is an excellent antiseptic that will help if the carpet is slightly affected by a fungus. |
Grapefruit stone essential oil | It is used in the same way as the tea tree. You will need 10 drops of oil for a glass of water. |
Yodine | Add 20 drops of pharmacy iodine to 10 liters of water. Treat the carpet with the obtained solution and leave it to dry. The product is suitable only for dark-colored products, as iodine makes them yellow. |
Ozone and ultraviolet | The ultraviolet lamp should warm the coating on both sides for half an hour. The Ozonator performs the same procedure, but with the help of a fan, so that the ozone does not disperse throughout the room, but falls directly on the carpet. |
Of course, if the mold has spread deep on the surface of the carpet, the home methods can be ineffective. In this case, the help of Guru Restoration specialists will help, thanks to which the carpet dry cleaning at home will give the maximum effect. As a result, the product will be clean, fresh, and disinfected.
To avoid unpleasant consequences, it is necessary first of all:
In conclusion, it may be noted that the emergence of mold in carpets and rugs – an unpleasant event in every home and if it happened, it is necessary to get rid of it as soon as possible. To prevent the emergence of mold, watch for moisture in your home, periodically conduct a thorough cleaning of all rooms and their disinfection to avoid the appearance of fungus, and in case of serious soaking of the carpet, as soon as possible, take care of its drying (until the complete drying of all products, including the base).
The post How To Get Rid Of Mold In Carpet appeared first on Guru Restoration.
]]>